ToF Sensor
ToF VL53L1CB USB Module
Single-zone time-of-flight distance sensor with a USB-C interface, built around the ST VL53L1CB — the longest-range chip of the family, measuring up to 8 m in long-distance mode. It runs ST's histogram firmware on VL53L1 silicon: multi-object detection, autonomous sequential-ROI scanning (2×2, 3×3 or 4×4 grids), and crosstalk immunity beyond 80 cm even behind a smudged cover glass. That makes it the pick for people detection, parking sensors and drones. Over USB-C the device shows up as a virtual COM port (CDC) and streams readings with a simple protocol — no I²C wiring, MCU code or drivers required. Works with anything that can open a serial port, from a PC to a Raspberry Pi or Jetson.
| Pełna nazwa modelu | ToF Sensor Module VL53L1CB USB v2.1 |
| Rozdzielczość | Jedna strefa; tryb wielostrefowy 2×2 / 3×3 / 4×4 przez sekwencyjne skanowanie ROI |
| Pole widzenia | 27° cone |
| Zasięg | 40 mm – 8000 mm |
| Częstotliwość odświeżania | up to 60 Hz |
| Układ | ST VL53L1CB |
| Montaż | 4 × M2 |
| Typ złącza | USB-C |
| Kompatybilne systemy | Windows, Linux, macOS |
| Protokół | CDC (virtual COM port) |
| Łączność | USB 2.0 FS |
| SKU | TOF-SENSOR-MODULE-VL53L1CB-USB-V21 |
| Model 3D | |
| Rysunek techniczny |
Kabel USB, uchwyt kabla, mocowanie statywu i statyw nie są dołączone do zestawu. Czy chcesz je dodać:

USB-A to USB-C Cable 1m for Sensors

Corner Surface Mount for ToF Sensors

Tripod Mount for ToF Sensors

Aluminium Mini Tripod
Zaprojektowany z myślą o architekturze AI-First. Więcej o naszej architekturze AI-first →
Dołączone oprogramowanie
- DEPZ Capture – Oprogramowanie do sterowania kamerą i nagrywania wideo
- DEPZ Depth – Wizualizacja głębi w czasie rzeczywistym
- DEPZ SDK – Zestaw deweloperski do własnych aplikacji
Pełna dokumentacja i samouczki dostępne na docs.depz.ai

